Track – measure the track from end to end. If the track overlaps in the middle, you must include the overlap.
Pole – measure the pole between the finials.
Tracks – measure from the top of the track to allow the track to be hidden by the curtains when they are closed
Poles – if you want the curtains to hang below the pole, measure from the underside of the ring;
Poles – if you want the curtains to hang above the pole, measure from the topside of the ring;
For Eyelet curtains, measure from the top of the pole
Measure from either of these points to;
SILL – 1cm above the sill
FULL LENGTH – 1cm above the carpet
BELOW SILL – the desired length
Or if you would like the curtains to puddle on to the floor, add the desired amount onto the FULL LENGTH measurement
Blinds can either sit inside or outside a window recess. Once you’ve decided where you would like the blind to sit, you can start on the measurements.
Always supply measurements Width x Drop, and in either CM’s or inches, not a combination of both.
Width (inside recess) – measure the tight recess size at the top and the bottom of the window recess
Width (outside recess) – measure the width required. When ordering it is important to state if this is the size you would like the fabric to be, or if on a roller blind, it is the pin-to-pin measurement.
Drop (inside recess) – measure the tight recess size from top to bottom
Drop (outside recess) – measure the drop required.
A few notes on blinds;
If you would like a quotation for made-to-measure curtains or blinds, please send an email to [email protected] with the correct sizes and details of your requirements. We usually aim to submit a quotation within 1 working day.
If you would like us to measure your curtains or blinds or flooring, please get in touch.